Luster

Glossy

Theoretical spreading rate

43g/m2, 22.3m2/L (calculated by15μm dry film, excluding loss)

Specific gravity:

About 0.96

Drying time

23±2℃: surface dry ≤4h, hard dry≤24h

Entirely cured

23±2℃: 7d.

Flash point

30℃

Storage period

12 months

Construction Instruction

Mixing ratio

Component A (epoxy resin liquid): Component B (curing agent)=3:2

Maturing time

23±2℃: 25min

Service life

23±2℃: 6h

Construction method

High pressure siphon spray, air spray, manual brushing and roller spray.

Diluent

Diluents for X-7 epoxy coating

The largest amount of dilution

High pressure siphon spray

Air spray

Manual brushing, roller spray

5%

5%

Generally do not need diluent

Spray orifice

0.4~0.5mm

2.0~2.5mm

_

Spray pressure

12~15Mpa

0.3~0.4 Mpa

_

Tool washing

Diluent for X-7 epoxy coating.

Film coating thickness

Wet film: 45μm, dry film:15μm

Coating interval

Surface treatment

Remove the grease, dirt and dust on the surface to be painted.

Construction condition

*Substrate temperature shall be more than dew point above 3℃, relative humidity shall be less than or equal to 85%;

*If the substrate temperature is lower than 5℃, epoxy resin liquid and curing agent stop reaction, construction can’t be undertaken.

Prior primer

Epoxy resin coating, which can be directly applied on the surface of the concrete.

Packing Specification

Container of 20 liters can load Component A of 18kg, container of 15 liters can load Component B of 12kg.

Considerations

*After the construction of the paint, put into use after the entire curing of the film.

*If maximum recoat interval is exceeded, roughen the preceding film before recoating to ensure adhesion between layers.

Safety guide

* Please pay attention to the security issues on the packaging. In addition, relevant Safety guide codes of nation or specified by the local government shall be followed.

*Avoid inhaling solvent vapors and spray mist for long term, skin and eye may not contact with the product.

*Forced ventilation shall be provided when applying the paint in confined spaces or stagnant air, although in good ventilation, protection tools shall be worn.

Annotation

＊Above-said thickness of dry film and wet film refers to the index while implementing the high-pressure air-free spray;

＊Relevant data in this instruction is obtained from laboratory, the actual product may be slightly different from it;

＊If above data is changed, the data is based on the latest instruction, without prior notification.