Luster

Lightless

Theoretical spreading rate

150g/m2, 10.70m2/L (calculated in 45μm dry film, excluding the loss)

Specific gravity:

About 1.60

Drying time

23±2℃: surface dryness≦4h, solid dryness≦24h

Flash point

35℃

Storage period

12 months

Construction Instruction

Mixing ratio

Canned by single pot

Maturing time

Use immediately after opening and stirring uniformly

Service life

Unlimit

Construction method

High-pressuresiphon spray, normal spray; manual painting;  roller coating  

Diluent

X-6 Alkyd coating diluent

Maximal dilution amount

Spray orifice

Spray pressure

Tool washing

X-6 Alkyd coating diluent

Film coating thickness

Wet film: 95μm                     Dry film: 55μm

Coating interval

Surface treatment

If previous pass of paint surface has been polluted,  the appropriate method should be adopted to remove the grease and dust, this paint diluent may also be utilized for wiping.

Construction condition

The temperature of substrate must be 3℃ higher than dewing point, and the relative humidity must be less than 85%.

Prior primer

Alkyd red lead anti-rust paint

Finishing paint

Alkyd enamel paint,alkyd tempered paint

Packing Specification

25Kg/20L per barrel

Safety guide  

Avoid breathing solvent steam or paint fog for a long term; the skin and eye can’t contact this product; while constructing in the narrow place or poorly ventilated place, the forced ventilation must be provided; while constructing, the protective articles should be worn.

“Annotation

＊Above-said thickness of dry film and wet film refers to the index while implementing the high-pressuresiphon spray;

＊Relevant data in this instruction is obtained from laboratory, the actual product may be slightly different from it;

＊If above data is changed, the data is based on the latest instruction, without prior notification.